manualshive.com logo in svg

Yamaha MOTIF6 Voice Editor, Owner'S Manual

The Yamaha MOTIF6 Voice Editor is a powerful software tool that allows users to easily customize and edit the voices of their Yamaha MOTIF6 synthesizer. With this intuitive manual, available for free download at manualshive.com, users can explore endless possibilities and enhance their music production experience.

Share
Download
background image

35

MOTIF  Basic Structure

System Overview

Basic Str

ucture

Plug-in board line-up

●

Single Part Plug-in Boards

Single Part Plug-in Boards let you add a completely different synthesizer or tone generator and play its voices by 
using a single part of the MOTIF.

•  Analog Physical Modeling Plug-in Board (PLG150-AN)

Using Analog Physical Modeling (AN) synthesis, the very latest digital technology is used to accurately reproduce 
the sound of analog synthesizers. With this board installed, you have real-time control over the playback of 
vintage synthesizer sounds as well as the very latest sounds heard in today’s club-oriented music.

• Piano Plug-in Board (PLG150-PF)

A massive waveform memory is dedicated to the reproduction of piano sounds. This board offers 136 stereo 
sounds, including a number of acoustic and electric pianos, and up to 64-note polyphony. You can even install two 
of these boards to double the polyphony to 128 notes. 

• Advanced DX/TX Plug-in Board (PLG150-DX)

The sounds of the DX7 are available on this Plug-in Board. Unlike PCM-based tone generators, this board uses the 
powerful FM Synthesis system — the same as found on DX-series synthesizers — for extraordinarily versatile 
and dynamic sound shaping potential. Sounds are compatible with those of the DX7, and the board can even 
receive DX7 data via MIDI bulk dump. 

• Virtual Acoustic Plug-in Board (PLG150-VL)

With Virtual Acoustic (VA) synthesis, the sounds of real instruments are modeled (simulated) in real time, giving 
a degree of realism that cannot be achieved using conventional PCM-based synthesis techniques. When playing 
these sounds using an optional MIDI Wind Controller (WX5), you can even capture some of the physical feel of 
woodwind instruments.

●

Effect Plug-in Board

• Vocal Harmony Plug-in Board (PLG100-VH)

With this board installed, you can add harmonies to selected parts using four types of effects.
Chorus parts for vocals can be created automatically from chords that have been prepared and stored as MIDI 
data. You can also use the MOTIF like a vocoder by connecting and using a microphone while playing the 
keyboard.

●

Multi-Part Plug-in Board

Multi-Part Plug-in Boards let you expand the voice polyphony of the MOTIF by giving you a full 16 independent 
instrumental parts. By using this type of board to play back sequencer tracks, you can reserve the maximum 
polyphony of the MOTIF for your keyboard performance. 

• XG Plug-in Board (PLG100-XG)

This Plug-in Board is a 16-part XG sound generator. You can play back XG/GM song files using the rich variety of 
sounds and effects on this board.

n

Additional Plug-in Boards will be available in the future.

About MODULAR SYNTHESIS PLUG-IN SYSTEM

The Yamaha Modular Synthesis Plug-in System offers powerful expansion and upgrade capabilities for Modular 
Synthesis-Plug-in-compatible synthesizers, tone generators and sound cards. This enables you to easily and effectively 
take advantage of the latest and most sophisticated synthesizer and effects technology, allowing you to keep pace with 
the rapid and multi-faceted advances in modern music production.

Summary of Contents for MOTIF6 Voice Editor













































































































































































































































































































Reviews:

No comments

Related manuals for MOTIF6 Voice Editor

Adobe Acrobat 7.0.5 Manual preview
Acrobat 7.0.5
Brand: Adobe Pages: 122
Adobe 23101764 - Photoshop CS - PC Manual preview
23101764 - Photoshop CS - PC
Brand: Adobe Pages: 105
Acer ASM Pro Installation Manual preview
ASM Pro
Brand: Acer Pages: 20
Acer eConsole User Manual preview
eConsole
Brand: Acer Pages: 33
Acer Destinator PN User Manual preview
Destinator PN
Brand: Acer Pages: 118
Sawgrass Aficio GX7000 Getting Started Manual preview
Aficio GX7000
Brand: Sawgrass Pages: 48
DCP Productions Motif XS Owner'S Manual preview
Motif XS
Brand: DCP Productions Pages: 76
A&D WinCT-Plus Instruction Manual preview
WinCT-Plus
Brand: A&D Pages: 36
F-SECURE MOBILE SECURITY 6 FOR ANDROID Manual preview
MOBILE SECURITY 6 FOR ANDROID
Brand: F-SECURE Pages: 22
Planet DrView User Manual preview
DrView
Brand: Planet Pages: 55
Picsel CLIE PEG-NZ90 Support Manual preview
CLIE PEG-NZ90
Brand: Picsel Pages: 8
Ulead DVDMovieFactory User Manual preview
DVDMovieFactory
Brand: Ulead Pages: 50
KAPERSKY ANTI-VIRUS 5.5 - FOR LINUX-FREEBSD MAIL... Administrator'S Manual preview
ANTI-VIRUS 5.5 - FOR LINUX-FREEBSD MAIL...
Brand: KAPERSKY Pages: 93
IBM Terminal Emulation TN5250 User Manual preview
Terminal Emulation TN5250
Brand: IBM Pages: 51
IBM VIAVOICE 10-PRO USB EDITION User Manual preview
VIAVOICE 10-PRO USB EDITION
Brand: IBM Pages: 160
TANDBERG D4068 Installation Manual preview
D4068
Brand: TANDBERG Pages: 19
EMC Avamar 6.1 User Manual preview
Avamar 6.1
Brand: EMC Pages: 106
Cisco 6.x and 7.0 Integration Notes preview
6.x and 7.0
Brand: Cisco Pages: 4

Brands by name

Popular brands

Load more brands