Edit
MONTAGE Reference Manual
95
Reference
A.SW1 On:
When the [ASSIGN 1] button is turned On, the Element will sound.
A.SW2 On:
When the [ASSIGN 2] button is turned On, the Element will sound.
A.SW Off:
When both the [ASSIGN 1] and [ASSIGN 2] buttons are turned Off, the Element will sound.
Elem Group (Element Group)
Determines the group for XA Control. All Elements that have the same type of XA features must have the
same group number. This setting does not apply when the XA Control parameters of all Elements are set to
Normal.
Settings:
1 – 8
Elem Connect (Element Connection Switch)
Determines which Insertion Effect (A or B) is used to process each individual Element. Set this to “Thru” to
bypass the Insertion Effects for the specified element.
Settings:
Thru, InsA, InsB
New Waveform
Loads Audio data stored in the USB flash memory as “Waveform.” For details on loading, see “Load”
(
After the Waveform is loaded, the Edit Waveform parameter (below) will be available.
Coarse (Coarse Tune)
Determines the pitch of each Element in semitones.
Settings:
-48 – +48
Fine (Fine Tune)
Determines the fine tuning for the pitch of each Element.
Settings:
-64 – 63
Pitch/Vel (Pitch Velocity Sensitivity)
Determines how the pitch of the selected Element responds to velocity.
Settings:
-64 – 63
Positive values:
The harder you play the keyboard, the more the pitch rises.
Negative values:
The harder you play the keyboard, the more the pitch falls.
0:
No change in pitch.
Fine/Key (Pitch Fine Key Follow Sensitivity)
Determines the degree to which the notes (specifically, their position or octave range) affect the pitch in
Fine Tuning.
Settings:
-64 – 63
Positive values:
The pitch of lower notes drops and that of higher notes rises.
Negative values:
The pitch of lower notes rises and that of higher notes drops.
Random (Random Pitch Depth)
Allows you to randomly vary the pitch of the Element for each note you play. The higher the value, the
greater the pitch variation.
Settings:
0 – 127
Vel Cross Fade (Velocity Cross Fade)
Determines how gradually the volume of an Oscillator decreases in proportion to the distance of Velocity
changes outside the Velocity Limit setting.
Settings:
0 – 127
The higher the value, the more gradually the volume decreases.
0:
No sound
Tempo Sync (Key On Delay Tempo Sync Switch)
Determines whether or not “Key On Delay” (below) is synchronized to the tempo.
Settings:
Off, On
Length (Key On Delay Time Length)
Determines the time (or elapsed delay) between the moment you press a note on the keyboard and the
point at which the sound is actually played. You can set different delay times for each Element. This is not
available when “Key On Delay Tempo Sync” is set to on.
Settings:
0 – 127
