MONTAGE Reference Manual
42
Reference
Edit Sequence
Calls up the Motion Sequence Setting display. You can create a custom Sequence consisting of up to
sixteen steps.
Cycle (Super Knob Motion Sequencer Cycle)
Selects the desired step length for the Motion Sequence.
Settings:
1 – 16
Amplitude (Super Knob Motion Sequencer Amplitude)
Determines how the entire Motion Sequence changes.
Settings:
0 – 127
Smooth (Super Knob Motion Sequencer Smoothness)
Determines the smoothness of the time change of the Motion Sequence.
Settings:
0 – 127
Sequence Select (Super Knob Motion Sequence Select)
Determines the Motion Sequence Type. This setting is applied to the Number B [1] – [8] buttons on the
panel in the Performance Control status.
Settings:
1 – 8
Polarity (Super Knob Motion Sequencer Polarity)
Determines the Sequence Polarity.
Settings:
Unipolar, Bipolar
Unipolar:
Unipolar changes only in a positive direction from a base parameter value according to the Sequence.
Bipolar:
Bipolar changes in both of positive and negative directions from a base parameter value.
Motion Seq Step Value (Super Knob Motion Sequencer Step Value)
Determines the Step Value for the Motion Sequence. You can control the Step Value 1 – 8 or 9 – 16 by the
Sliders 1 – 8 depending on the cursor position on the display.
Settings:
0 – 127
Motion Seq Step Type (Super Knob Motion Sequencer Step Type)
Determines each Step Type of the Motion Sequence. You can switch between the Step Types A and B for
the Step 1 – 8 or 9 – 16 by the SCENE [1] – [8] buttons depending on the cursor position on the display.
Settings:
A, B
Motion Seq Step Value
Motion Seq Step Type