Edit
MONTAGE Reference Manual
105
Reference
From the Filter EG display you can make all time and level settings for the Filter EG, which determine how
the sound changes over time for Elements. These can be used to control the change the sound from the
moment a note is pressed on the keyboard to the moment the sound stops.
The full names of the available parameters are shown in the chart below, as they appear in the display.
Settings:
Time: 0 – 127
Level: -128 – +127
Time/Key (FEG Time Key Follow Sensitivity)
Determines the degree to which the notes (specifically, their position or octave range) affect the Filter EG
Times. The basic speed of change for the FEG is at the note specified in Center Key (below).
Settings:
-64 – +63
Positive values:
High notes result in a high FEG transition speed while low notes result in a slow speed.
Negative values:
High notes result in a slow FEG transition speed while low notes result in a high speed.
0:
The FEG transition speed does not change, regardless of the played note.
Center Key (FEG Time Key Follow Sensitivity Center Key)
Determines the central note for the “Time/Key” parameter above.
Settings:
C-2 – G8
Filter EG
Operation
[PERFORMANCE]
[EDIT]
Part selection
Element selection
[Filter]
[Filter EG]
Hold Attack
Decay1
Decay2
Release
Time
Hold Time
Attack Time
Decay1 Time
Decay2 Time
Release Time
Level
Hold Level
Attack Level
Decay1 Level
Decay2 Level
Release Level
