Edit
MONTAGE Reference Manual
136
Reference
From the Routing display you can determine the Effect connections for Parts.
Insertion FX Switch
Determines whether the Insertion Effect A/B is active or not.
Settings:
Off, On
Category (Effect Category)
Type (Effect Type)
Determines the category and type for the selected Effect.
Settings:
For details on the editable Effect categories and types, see the Data List PDF document. Also, for details on the
description for each Effect type, see the Synthesizer Parameter Manual PDF document.
Preset
Allows you to call up pre-programmed settings for each Effect type, designed to be used for specific
applications and situations.
Settings:
For a list of all Preset Effects, see the Data List PDF document.
Side Chain/Modulator (Side Chain/Modulator Part)
Determines the Part used for the Side Chain/Modulator. This is not active depending on Effect Types.
For details on the Side Chain/Modulator, see the Routing display (
) of the Normal Part (AWM2).
Settings:
Part 1 – 16, A/D, Master, Off
Ins Connect (Insertion Connection Type)
Determines the effect routing for Insertion Effects A and B. The setting changes are shown on the diagram
in the display, giving you a clear picture of how the signal is routed. For details, see the section “Effect
connection” (
) of the “Basic Structure.”
Settings:
Parallel, Ins A
B, Ins B
A
Rev Send (Reverb Send)
Determines the Send level of the signal sent from Insertion Effect A/B to the Reverb effect.
Settings:
0 – 127
Effect
Routing
Operation
[PERFORMANCE]
[EDIT]
Part selection
ELEMENT/OPERATOR [COMMON]
[Effect]
[Routing]
Insertion FX Switch
Insertion FX Switch