4. Screens
MMP1 Operation Manual
50
4-2-5. Editor view - Preference screen
This screen is used to configure various MMP1 Controller settings.
Talkback Label
Enter a channel name up to 17 alphanumeric characters and symbols.
Speaker Label
Enter a channel name up to 17 alphanumeric characters and symbols.
Monitor Level Knob Operation
Rotary
Drag to change the value as you would rotate a knob.
Linear
Drag up and down or left and right to change a value.
Knob Operation
Rotary
Drag to change the value as you would rotate a knob.
Linear
Drag up and down or left and right to change a value.
Recall Confirmation
When turned on (green), a confirmation dialog box will appear when recalling a Scene, and when turned off
the Scene will be recalled without a confirmation message.
Talkback Button Behavior
Latch
Toggles between on and off when tapped.
Momentary
Turns on while being held, and turns off when released.
Select the control
method for the Control
view Monitor Level
Knob
Add names (labels) to buttons used to
select Talkback interrupt destinations
Add names (labels) to buttons used to
select Speaker Sets
Shows/hides the status
of mics controlled with
the Commentary
functions on the CH
Strip screen
Select the “Talkback Button Behavior”
Select how knobs
located on each
screen are controlled
(excluding the Monitor
Level Knob)
Select whether to show a confirmation message or not when recalling a Scene
