Yamaha MMP1 Operation Manual Download Page 42

Page: 42 / 67

4. Screens

MMP1 Operation Manual

4-2. MMP1 Controller

4-2-1. Menu bar

A shared menu that appears on all screens except in Control view.

4-2-2. Control view

This screen is used for monitor control. Compared to the Main Monitor screen, this screen emphasizes readability, limiting
the functions that appear to those that are used most frequently.

NOTE

• This screen is limited to support of these formats: stereo, 5.1, 7.1, 7.1.2, 7.1.4 and 9.1.2.

• This screen has been optimized to the settings used in the Setup Wizard for the MMP1 Editor.

Switches between the Control view and other screens.

For selecting a Scene.

Displays errors.

Switches between Control view and Editor view,
and displays the Information screen

Selects a Scene

Switches screens

Displays online/offline status
Tap to display the “Select MMP1” dialog box

Double tap with two fingers to mute all output
Double tap with two fingers again to cancel the mute all function

Displays errors

Cooling fan has stopped
Please contact your Yamaha dealer and have qualified
Yamaha service personnel inspect the cooling fan.

The backup battery voltage is reduced
Please contact your Yamaha dealer and have qualified
Yamaha service personnel replace the backup battery.

Memory defects
If the issue is still not solved even after restoring factory
settings, please contact qualified Yamaha service
personnel.

Dante module defects

NOTE

Please refer to the MMP1 Getting Started for more information
about restoring factory settings and contact qualified Yamaha
service personnel.

Summary of Contents for MMP1




































































Search results

Summary of Contents for MMP1

Reviews:

Related manuals for MMP1

Brands by name

Popular brands

Yamaha MMP1, Operation Manual

Search results

Summary of Contents for MMP1

Reviews:

Related manuals for MMP1

Brands by name

Popular brands