manualshive.com logo in svg

Yamaha MAJESTY YP250, Owner'S Manual

Share
Download
Yamaha MAJESTY YP250 Owner'S Manual Download Page 73

6-22

PERIODIC MAINTENANCE AND MINOR REPAIR

6

NOTE:

The sponge material should be wet
but not dripping.

7. Insert the sponge material into

the air filter case.

8. Install the air filter case cover by

installing the screws.

4. Blow the dirt out of the air filter

element with compressed air as
shown.

5. Check the V-belt case air filter

element for damage and replace
it if necessary.

6. Install the V-belt case air filter

element cover by installing the
screws.

7. Install the air filter case cover by

installing the screws.

8. Install the cowling.

2

1

1.

V-belt case air filter cover

2.

V-belt case air filter element

Cleaning the V-belt case air filter
element

1. Remove cowling A. (See page 

6-7 for cowling removal and
installation procedures.)

2. Remove the air filter case cover

by removing the screws.

3. Remove the V-belt case air filter

cover by removing the screws.

2

1

1.

V-belt case air filter cover

2.

Screw (

×

3)

Recommended oil:

Engine oil

5SJ-28199-E2  8/9/02 4:06 PM  Page 71

Summary of Contents for MAJESTY YP250





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands