manualshive.com logo in svg

Yamaha MAJESTY YP250, Owner'S Manual

Share
Download
Yamaha MAJESTY YP250 Owner'S Manual Download Page 32

3-15

EAU04284

ECA00104

c

C

Use only unleaded gasoline. The
use of leaded gasoline will cause
severe damage to internal engine
parts, such as the valves and pis-
ton rings, as well as to the exhaust
system.

INSTRUMENT AND CONTROL FUNCTIONS

3

Your Yamaha engine has been
designed to use regular unleaded
gasoline with a research octane num-
ber of 91 or higher. If knocking (or
pinging) occurs, use a gasoline of a
different brand or premium unleaded
fuel. Use of unleaded fuel will extend
spark plug life and reduce mainte-
nance costs.

EAU03098

Catalytic converter

Catalytic converter

This scooter is equipped with a cat-
alytic converter in the muffler.

EW000128

w

The exhaust system is hot after
operation. Make sure that the
exhaust system has cooled down
before doing any maintenance
work.

Recommended fuel:

REGULAR UNLEADED 
GASOLINE ONLY

Fuel tank capacity:

Total amount:

12 L

5SJ-28199-E2  8/9/02 4:05 PM  Page 30

Summary of Contents for MAJESTY YP250





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands