Yamaha HTR-4064 Owner'S Manual Download Page 18

Page: 18 / 116

■

Connection method 2

Connect a TV to the unit with an HDMI cable and an optical cable.

• The following connection and steps are supplied, supposing the “HDMI” in the “Setup” menu has not been

changed from the default setting (p.69).

• By connecting a TV to the unit with an HDMI cable, each function for the unit can be configured while

viewing the TV monitor (p.60).

• If your playback device is connected to the analog video input jacks (COMPONENT VIDEO or VIDEO), you

also need to connect the TV to the MONITOR OUT (COMPONENT VIDEO or VIDEO) jack with an analog

video cable (p.20).

Necessary setting

To use the HDMI control function, the following settings are required in advance.

After connecting external devices (TV, playback devices, etc.) and AC
power cable, turn on the unit, TV and playback devices.

Configure the settings for HDMI Control.

Activate the HDMI control function of the TV and the devices that support the HDMI
control function.

For details on setting the HDMI control function, refer to manual of each device.

Select the input source of the TV to the video input from the HDMI OUT jack of the
unit.

Press SETUP.

Press the cursor keys (

) to select “HDMI.”

Press the cursor keys (

) to select “HDMI Control,” and then press ENTER.

Press the cursor keys (

) to select “On,” and then press ENTER.

Press SETUP.

Turn off the TV.

The unit and devices are also turned off automatically with the TV’s operation. If they
do not turn off, turn them off manually.

Turn on the TV.

The unit also turns on. If the unit does not turn on, turn it on manually.

Change input video source on the TV to video signals from the unit.

(HDMI Control -compatible TV)

DOCK

HDMI 1

(BD/DVD)

HDM

75Ω

MONITOR OUT

ANTENNA

VIDEO

AV 1

OPTICAL

AV 2

AV 3

AV 5

AV 6

OUT

AUDIO

MONITO

COAXIAL

(CD)

COMPONENT

VIDEO

HDMI OUT

AV 4

(TV)

OPTICAL

ARC

HDMI

HDMI OUT

ARC

HDMI

AUDIO1

AV 6

OUT

AV 4

(TV)

OPTICAL

HDMI

The unit (rear)

HDMI OUT jack

HDMI input

Audio output

(Digital optical)

AV4 (OPTICAL) jack

RETURN

VOLUME

ENTER

TOP

POP UP

DISPLAY

OPTION

SETUP

RETURN

VOLUME

TOP

POP UP

DISPLAY

OPTION

SETUP

TER

URN

DIS

Cursor keys

Continues to the

next pa

1 2 3

Connecting a TV

4 5 6 7 8

Summary of Contents for HTR-4064





















































































































Search results

Summary of Contents for HTR-4064

Reviews:

Related manuals for HTR-4064

Brands by name

Popular brands

Yamaha HTR-4064, Owner'S Manual

Search results

Summary of Contents for HTR-4064

Reviews:

Related manuals for HTR-4064

Brands by name

Popular brands