Yamaha HTR-4064 Owner'S Manual Download Page 60

Page: 60 / 116

CONFIGURATIONS

The settings of the unit can be changed from the “Setup” menu
displayed on the TV screen.

• Connect the unit and a TV with an HDMI cable to display the “Setup” menu. If the

TV is not connected with an HDMI cable, reconnect it with an HDMI cable.

Press SETUP.

Press the cursor keys ( / ) to select the menu you
want to configure.

• Menus can be selected while the menu cursor is displayed (white box around

the menu icon). When configuring the settings, press RETURN repeatedly to

be able to select menus.

• For details on settings in the “Setup” menu, refer to the “Setup menu list”

(p.61).

Press the cursor keys (

) to select an item (p.61)

and press ENTER.

• When pressing ENTER to select an item that has a folder icon (

), a detail

setting menu is displayed. Press RETURN to close the detail settings menu

and return to the previous menu screen.

Press the cursor keys (

/ / ) to adjust the

setting and press ENTER.

• Operation procedures vary depending on selected items. For details, refer to

the directions for each setting item.

Press SETUP to close the “Setup” menu.

Configuring various functions (Setup menu)

SCENE

RETURN

VOLUME

ENHANCER

SLEEP

DIRECT

HDMI

INFO

MEMORY

PRESET

MOVIE

MUSIC

DVD

MUTE

ENTER

TV VOL

TV CH

TOP

MENU

POP-UP

MENU

DISPLAY

SOURCE

RECEIVER

CODE SET

USB

AUDIO

OPTION

SETUP

TUNING

STRAIGHT

SUR. DECODE

INPUT

MUTE

ENT

MODE

RADIO

TUNER

V-AUX

[ A ]

DOCK

SCENE

VOLUME

ENHANCER

SLEEP

DIRECT

HDMI

INFO

MEMORY

PRESET

MOVIE

MUSIC

DVD

MUTE

TV VOL

TV CH

TOP

MENU

POP-UP

MENU

DISPLAY

SOURCE

RECEIVER

CODE SET

USB

AUDIO

OPTION

TUNING

STRAIGHT

SUR. DECODE

INPUT

MUTE

ENT

MODE

RADIO

TUNER

V-

V AUX

[ A ]

DOCK

ENTER

RETURN

SETUP

Cursor keys

When the HDMI control function is enabled on both the unit and
a TV that supports the HDMI control, the TV may automatically
operate as follows when SETUP is pressed.

•

The TV turns on.

•

The video input on the TV is switched to the HDMI input connected
to the unit.

•

The “Setup” menu is displayed on the TV screen.

Menu items

Selected item

Selected menu

Current settings and folders

Summary of Contents for HTR-4064





















































































































Search results

Summary of Contents for HTR-4064

Reviews:

Related manuals for HTR-4064

Brands by name

Popular brands

Yamaha HTR-4064, Owner'S Manual

Search results

Summary of Contents for HTR-4064

Reviews:

Related manuals for HTR-4064

Brands by name

Popular brands