Yamaha HTR-4064 Owner'S Manual Download Page 51

Page: 51 / 116

Select the Bluetooth wireless audio receiver from
the Bluetooth device list, and then enter a pass key
“0000.”

When the pairing is completed, “Completed” appears.

• Depending on Bluetooth devices, “BT connected” appears after pairing. In

this case, at the same time with pairing, wired connection is also completed.

Therefore, only by starting playback with the Bluetooth device, audio output

from the unit automatically.

Press OPTION to close the menu.

Playing back songs by connecting to the
Bluetooth device

When pairing is completed, perform the wireless connection
between the Bluetooth device and the Bluetooth wireless audio
receiver. While connecting, when playback is started with the
Bluetooth device, audio is output from the unit.

• Depending on the Bluetooth device, a wireless connection is established

automatically by controlling the Bluetooth device. In this case, following steps from

2-3 is unnecessary.

Press DOCK to select “DOCK” as the input source.

Press OPTION.

Press the cursor keys (

) repeatedly to select

“Connect,” and then press ENTER.

When the wireless connection is completed, “BT connected”
appears.

• When some Bluetooth devices are paired with the Bluetooth wireless audio

receiver, the Bluetooth device, which has the Bluetooth function enabled and

was connected most recently, is automatically connected to the Bluetooth

wireless audio receiver. When the device wireless audio receiver is

connected to another device, disable the Bluetooth function of the device or

connect them by operating Bluetooth device.

• ”Not found” appears when the wireless connection is not established.

Confirm the following, and then retry the connection.

- Both the Bluetooth device and the Bluetooth wireless audio receiver are

paired.

- The Bluetooth device is turned on, and the Bluetooth function of that device

is set to enable.

- The Bluetooth device is within 10 m (32 ft.) from the Bluetooth wireless audio

receiver.

Play back songs with the Bluetooth device.

• Select “Disconnect” in step 3 to disconnect the wireless connection.

SW
C

L
SL

Completed

DOCK

VOL.

SCENE

VOLUME

ENHANCER

SLEEP

DIRECT

HDMI

INFO

MEMORY

PRESET

MOVIE

MUSIC

DVD

MUTE

ENTER

TV VOL

TV CH

POP-UP

MENU

DISPLAY

SOURCE

RECEIVER

CODE SET

USB

AUDIO

OPTION

SETUP

TUNING

STRAIGHT

SUR. DECODE

INPUT

MUTE

ENT

MODE

RADIO

TUNER

V-AUX

[ A ]

DOCK

TV VOL

TV CH

INPUT

MUTE

ENT

MODE

SCENE

VOLUME

ENHANCER

SLEEP

DIRECT

HDMI

INFO

MEMORY

PRESET

MOVIE

MUSIC

DVD

MUTE

POP-UP

MENU

DISPLAY

SOURCE

RECEIVER

CODE SET

USB

AUDIO

SETUP

TUNING

STRAIGHT

SUR. DECODE

RADIO

TUNER

V-

V AUX

[ A ]

DOCK

ENTER

OPTION

Cursor keys

SW
C

L
SL

BTconnected

DOCK

VOL.

Summary of Contents for HTR-4064





















































































































Search results

Summary of Contents for HTR-4064

Reviews:

Related manuals for HTR-4064

Brands by name

Popular brands

Yamaha HTR-4064, Owner'S Manual

Search results

Summary of Contents for HTR-4064

Reviews:

Related manuals for HTR-4064

Brands by name

Popular brands