En
68
Configuring the various settings (Function)
Set the various features that have handy functions.
■
Input Rename
Changes the input name displayed on the front display and TV screen.
Input
All inputs except for TUNER
■
Procedure
1
Select “Input Rename,” and press ENTER.
2
Press the cursor keys (
/
) to select a name which you want to rename, and then
press ENTER.
3
Press the cursor keys (
/
) to select a preset name to your liking, and then press
ENTER.
4
(To confirm the selected name) Press ENTER.
(To rename the selected name) Press the cursor keys (
/
) to select a character
that you want to change, and then press the cursor keys (
/
) to change the
character.
5
Press the cursor keys (
/
) to select “OK,” and then press ENTER.
6
To change other input names, repeat step 2 to 5.
7
Press SETUP to close “Input Rename.”
• Select “CANCEL” in step 5 to return to the previous screen without confirming the name changed.
■
Auto Power Down
If you do not operate the unit or use the remote control for an extended period of time, it
will automatically go into standby mode (Auto Power Down function).
Settings
Default setting
8Hours (U.K. and Europe models)
Off (Other models)
■
Dimmer
Sets the brightness of the front display.
Setting range
-4 to 0 (The higher the value the brighter the display.)
Default setting
0
■
Short Message
Turns the short message displayed on the TV screen on or off. For example, this
settings is set to “Off” to prevent that the subscription of video images is got behind the
short message.
Settings
Input currently edited
Input name currently renamed
Off
Auto Power Down function is disabled.
4Hours, 8Hours,
12Hours
Goes into standby mode, when you have not operated the unit for the
selected amount time. A countdown of 30 seconds is displayed on the
front display before entering the standby mode.
Off
Does not display the short message on the TV screen.
On (Default)
Displays the short message on the TV screen. When the output video
signals are being upscalled, the short message may not be displayed.
