Yamaha HTR-4064 Owner'S Manual Download Page 61

Page: 61 / 116

Setup menu list

Menu

Item

Description

Page

Speaker

Configuration

Front

Selects the size of the front speakers.

Center

Selects the size of the center speaker and whether or not to use the speaker.

Surround

Selects the size of the surround speakers and whether or not to use the speakers.

Subwoofer

Phase

Selects the phase of the subwoofer signals.

Bass Cross Over

Sets the lower limit of the low-frequency component produced from speakers set to “Small.”

Extra Bass

Selects the speaker to produce the front channel low-frequency components.

Distance

Separately adjusts the distance between each speaker and the listening position respectively.

Level

Separately adjusts the volume of each speaker.

Equalizer

Selects an equalizer type.

Test Tone

Turns the test tone generator on or off.

Sound

Lipsync

Adjusts the delay between audio and video output.

Dynamic Range

Selects the dynamic range adjustment method for the audio bit stream (Dolby Digital and DTS) signal playback.

Max Volume

Specify the maximum volume level that can be adjusted by VOLUME on the remote control.

Initial Volume

Sets the initial volume for when the unit is turned on.

DSP

CINEMA DSP 3D

Enables/disables CINEMA DSP 3D.

Program

Selects and adjusts a sound program and a decoder.

Function

Input Rename

Changes the input source name.

Auto Power Down

Selects the amount of time after no operation is done that the unit enters standby.

Dimmer

Reduces the brightness of the front display.

Short Message

Turns the short messages displayed on the TV screen on or off.

Memory Guard

Prohibits setting changes to prevent careless changes being made to the settings of the “Setup” menu, YPAO, and SCENE.

HDMI

HDMI Control

TV Audio Input

Selects the input source that receives audio signals from a TV.

ARC

Turns the Audio Return Channel function (ARC) on or off.

Standby Sync

Selects the interlocked operation of the unit when the TV is turned off.

SCENE

Selects whether or not to interlock an external device connected to this unit when selecting the appropriate SCENE.

Audio Output

Specifies where audio signal is output.

Standby Through

Specifies whether or not to transmit HDMI audio/video to the TV during standby mode.

Language

Selects the language used for menus and messages output from the unit and displayed on the TV screen.

Summary of Contents for HTR-4064





















































































































Search results

Summary of Contents for HTR-4064

Reviews:

Related manuals for HTR-4064

Brands by name

Popular brands

Yamaha HTR-4064, Owner'S Manual

Search results

Summary of Contents for HTR-4064

Reviews:

Related manuals for HTR-4064

Brands by name

Popular brands