Yamaha GRIZZLY Ultramatic YFM660FP, Service Manual

Page: 327 / 408

8 - 37
CHAS
STEERING SYSTEM
REMOVING THE REAR BRAKE SWITCH
1.Remove:
●
Rear brake switch
1
NOTE:
Push the fastener when removing the rear
brake switch out of the rear brake lever holder.
CHECKING THE HANDLEBAR
1.Inspect:
●
Handlebar
Bends/cracks/damage
→
Replace.
WARNING
Do not attempt to straighten a bent handle-
bar as this may dangerously weaken the
handlebar.
INSTALLING THE HANDLEBAR
1.Install:
●
Handlebar
●
Handlebar holders
NOTE:
The upper handlebar holder should be
installed with the punched mark
1
forward
2
.
CAUTION:
First tighten the bolts
3
on the front side of
the handlebar holder, and then tighten the
bolts
4
on the rear side.
T
R .
.
20 Nm (2.0 m • kg, 14 ft • lb)
INSTALLING THE REAR BRAKE LEVER
1.Install:
●
Handlebar switch
1
●
Rear brake lever
●
Lever bracket
2
NOTE:
Install the lever bracket as shown.
a
66 mm (2.6 in)