Yamaha GRIZZLY Ultramatic YFM660FP, Service Manual

Page: 280 / 408

7 - 22
DRIV
REAR CONSTANT VELOCITY JOINT/FINAL DRIVE GEAR
AND DRIVE SHAFT
ASSEMBLING THE REAR CONSTANT
VELOCITY JOINT
1.Apply:
●
Lithium-soap base grease
(into the ball joint assembly)
2.Install:
●
Dust boots
1
●
Boot bands
2
,
3
*****************************************************
Installation steps:
●
Apply lithium-soap base grease into the dust
boots.
●
Install the dust boots.
●
Install the dust boot bands.
NOTE:
●
The new boot bands may differ from the orig-
inal ones.
●
The dust boots should be fastened with the
boot bands
3
at the grooves in the joint
shaft.
*****************************************************
Lithium-soap base grease:
50 g (1.8 oz) per dust boot (rear
wheel side)
60 g (2.3 oz) per dust boot (final
gear case side)
New
3.Check:
●
Free play (thrust movement)
Excessive play
→
Replace the joint assem-
bly.