Yamaha GRIZZLY Ultramatic YFM660FP, Service Manual

Page: 125 / 408

3 - 48
CHK
ADJ
CHECKING THE FINAL GEAR OIL LEVEL
1.Place the machine on a level place.
2.Loosen:
●
Oil check bolt
1
NOTE:
●
Loosen the slightly.
●
Do not remove the bolt, otherwise the gear
oil may come out.
3.Check:
Check that gear oil seeps out from where the
check bolt was loosened. If no gear oil seeps
out, change the final gear oil.
Refer to “CHANGING THE FINAL GEAR
OIL”.
CHANGING THE FINAL GEAR OIL
1.Place the machine on a level surface.
2.Place a container under the final gear case
to collect the used oil.
3.Remove:
●
Oil filler bolt
●
Drain plug
1
4.Drain:
●
Final gear oil
5.Install:
●
Drain plug
NOTE:
Check the gasket (drain plug). If it is damaged,
replace it with a new one.
T
R
.
.
23 Nm (2.3 m • kg, 16 ft • lb)
CHECKING THE FINAL GEAR OIL LEVEL/
CHANGING THE FINAL GEAR OIL