Yamaha GRIZZLY Ultramatic YFM660FP, Service Manual

Page: 232 / 408

4 - 89
ENG
MIDDLE GEAR
2.Remove:
●
Nut
1
●
Washer
●
Universal joint yoke
NOTE:
Use the universal joint holder
2
to hold the
universal joint yoke.
3.Remove:
●
Nut
1
●
Washer
●
Coupling gear
2
NOTE:
Use the coupling gear/middle shaft tool
3
to
hold the coupling gear.
Universal joint holder:
P/N. YM-04062
Coupling gear/middle shaft tool
P/N. YM-01230,90890-0229
4.Remove:
●
Bearing housing assembly
1
*****************************************************
Removal steps:
●
Clean the outside of the middle driven shaft.
●
Place the middle driven shaft onto a hydrau-
lic press.
CAUTION:
●
Never directly press the shaft end with a
hydraulic press, this will result in damage
to the shaft thread.
●
Install the suitable socket
2
on the shaft
end to protect the thread from damage.
●
Press the shaft end and remove the bearing
housing.
*****************************************************