Yamaha GRIZZLY Ultramatic YFM660FP, Service Manual

Page: 237 / 408

4 - 94
ENG
MIDDLE GEAR
6) Round off hundredths digit and select
appropriate shim(s).
In the example above, the calculated shim
thickness is 0.64 mm. The chart instructs
you, however, to round off 4 to 5.
Shims are supplied in the following thickness.
*****************************************************
Hundredths Round value
0, 1, 2 0
3, 4, 5, 6, 7 5
8, 9 10
Middle drive pinion gear shim
Thickness (mm)
0.10 0.40
0.15 0.50
0.20 0.60
0.30
INSTALLING THE MIDDLE DRIVEN SHAFT
1.Install:
●
Bearing retainer
1
NOTE:
Attach the ring nut wrench
2
.
CAUTION:
The middle driven shaft bearing retainer
has left-handed threads. To tighten the
retainer turn it counterclockwise.
Ring nut wrench:
P/N. YM-38404, 90890-01430
LT
T
R
.
.
80 Nm (8.0 m • kg, 58 ft • lb)