Yamaha GP800R WaveRunner 2003, Service Manual

Page: 188 / 247

7-37
E
– +
ELEC
INDICATION SYSTEM
Speed sensor
1. Check:
●
Speed sensor output voltage and
pulses
Out of specification
→
Replace.
Speed sensor output voltage
(dependant on the paddle wheel
position):
Less than 400 mV/
More than 11.6 V
Output pulse:
2 pulses/one-full turn
Checking steps:
●
Apply DC 12 voltage to the white
three-pin connector (between the red/
yellow and black/yellow leads).
●
Rotate the paddle wheel by hand and
measure the voltage between the yel-
low and black/yellow leads.
NOTE:
As the paddle wheel is rotated, a square-
wave voltage signal
a
is produced.
●
Two pulses occur every time the pad-
dle wheel makes one-full turn.