Yamaha GP800R WaveRunner 2003, Service Manual

Page: 185 / 247

7-34
E
– +
ELEC
INDICATION SYSTEM
Oil level gauge
1. Check:
●
Oil level gauge
Not operating
→
Replace the multi-
function meter.
NOTE:
When inspecting the multifunction meter
unit or emptying the fuel tank, connect the
white/blue and black terminals (green two-
pin connector) with a jumper lead
1 to pre-
vent the fuel warning indicator from being
activated.
Checking steps:
●
Supply DC 12 voltage to the white
four-pin connector (+: red, –: black)
with a battery.
●
Disconnect the white two-pin connec-
tor (blue and black leads).
●
Connect the blue and black terminals
with a jumper lead
2
.
●
Connect the green and red terminals
with a jumper lead
3
.
NOTE:
If the jumper lead is installed for more
than 30 seconds, the display will auto-
matically turn off.
●
Remove the jumper lead 2 from the
white two-pin connector.
●
Disconnect the jumper lead 3 and
then connect it to green and red ter-
minal again.
●
Make sure the oil symbol
4
and
“WARNING” lamp 5 blinks, and the
buzzer sounds intermittently.
WARNING
YAMAHA
8
7
6
5
4
3
2
1
MPH FUEL
HOUR
x1000r/min
MULTI
DISPLAY
5
4