Yamaha FZS600'98, Service Manual

Page: 201 / 364

5-10
WATER PUMP
COOL
a
b
NOTE:
NOTE:
10 Nm (1.0 m kg)
10 Nm (1.0 m kg)
NOTE:
Align the slot
a
on the impeller shaft with
the projection b on the oil pump shaft.
Before installing the water pump housing,
apply a thin coat of lithium soap base
grease onto the O-ring.
2. Install:
water pump housing cover 1
water pump outlet pipe 2
Always use a new gasket and O-rings.
Before installing the water pump outlet pipe,
apply a thin coat of lithium soap base grease
onto the O-rings.
Water pump housing cover bolt
10 Nm (1.0 m kg)
3. Install:
gasket
dowel pins
drive chain sprocket cover 1
4. Install:
shift arm 1
Align the slot
a
on the shift arm 1 with the
punch mark b on the shift shaft 2 .
5. Fill:
cooling system
(with the specified amount of the recom-
mended coolant)
Refer to “CHANGING THE COOLANT” in
chapter 3.
6. Check:
cooling system
Leaks
Repair or replace any faulty part.
7. Measure:
radiator cap opening pressure
Below the specified pressure
Replace
the radiator cap.
Refer to “CHECKING THE RADIATOR”.