Yamaha FZS600'98, Service Manual

Page: 294 / 364

8-4
CHECKING SWITCHES
ELEC
NOTE:
YP-N
CHECKING SWITCHES
CHECKING STEPS
Using pocket tester, check switches for continu-
ity between their terminals to determine whether
they are correctly connected.
Replace the switch component if any of the com-
binations does not produce the correct reading.
Pocket tester:
90890-03112
Turn the switch to the “ON”, “OFF”
positions several times.
Adjust the pocket tester to correct “0”
position before checking switches.
Set the pocket tester selector to “ 1”
Ω
.
SWITCH CONNECTION AS SHOWN IN THIS
MANUAL
This manual contains connection charts, like the
one shown on the left, showing the terminal con-
nections of switches (e.g. the main switch, han-
dlebar switch, brake switch, lighting switch etc.)
The column on the extreme left indicates the dif-
ferent switch positions, the top line indicates the
colors of the leads connected to the terminals on
the switch.
“ ” indicates terminals between which
there is continuity, i.e. a closed circuit, in the
given switch position.
In this chart:
“Br and R” have continuity with the switch in the
“ON” position.