Yamaha FZS600'98, Service Manual

Page: 270 / 364

7-51
HANDLEBAR
CHAS
b
23 Nm (2.3 m kg)
CAUTION:
NOTE:
NOTE:
NOTE:
NOTE:
EB704701
INSTALLING THE HANDLEBAR
1. Stand the motorcycle on a level surface.
Securely support the motorcycle so that
there is no danger of it falling over.
2. Install:
handlebar 1
upper handlebar holders 2
First, tighten the bolts on the front side
a
of the handlebar holder, then on the
rear side.
turn the handlebar all the way to the left
and right. If there is any contact with the
fuel tank, adjust the handlebar posi-
tion.
The upper handlebar holders should be
installed with the arrows facing forward.
Align the match marks b on the handlebar
with the upper surface of the lower handle-
bar holders.
3. Install:
clutch lever holder
handlebar grip 1
left grip end 2
There should be 1.0 mm of clearance
a
be-
tween the handlebar grip and the left grip
end.
4. Install:
left handlebar switch 1
Align the projection a on the left handlebar
switch with the hole b in the handlebar.
5. Install:
master cylinder bracket 1
Align the mating surfaces of the master cyl-
inder bracket with the punch mark (right han-
dlebar switch side)
a
on the handlebar.