Yamaha FZS600'98, Service Manual

Page: 266 / 364

7-47
FRONT FORK
CHAS
NOTE:
NOTE:
NOTE:
While filling the front fork leg, keep it up-
right.
After filling, slowly pump the front fork leg
up and down to distribute the fork oil.
9. Install:
spring 1
spring seat 2
spacer 3
cap bolt
Install the spring with the smaller pitch fac-
ing up.
Before installing the cap bolt, apply grease
onto the O-ring.
Temporarily tighten the cap bolt.
EB703710
INSTALLING THE FRONT FORK LEGS
The following procedure applies to both of the
front fork legs.
1. Install:
front fork leg
Temporarily tighten the upper and lower
bracket pinch bolts.
Make sure that the inner fork tube is flush
with the top of the handlebar holder.
2. Tighten:
lower bracket pinch bolt 1
cap bolt 2
upper bracket pinch bolt 3
Lower bracket pinch bolt
30 Nm (3.0 m kg)
Cap bolt
23 Nm (2.3 m kg)
Upper bracket pinch bolt
30 Nm (3.0 m kg)
Make sure that the brake hoses are
routed properly.