Yamaha FJR1300A(X), Service Manual

Page: 400 / 754

MIDDLE GEAR
5-95
▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
a. Position the middle gears with the appropri-
ate shim(s) that has had its respective thick-
ness calculated from information marked on
the crankcase and middle driven pinion gear.
b. To find middle drive pinion gear shim thick-
ness “A”, use the following formula.
“a”= 65.00
“b”= 18.94
“c”= a numeral on the lower crankcase, to be
divided by 100 and added to “84”
Example:
“a” is 65.00
“b” is 18.94
If the lower crankcase is marked “45”
“c” is 84.45 (i.e., 84.00 + 0.45 = 84.45)
“A” = 84.45 - 65.00 - 18.94 = 0.51
Round off to the hundredths digit and select
the appropriate shim(s).
NOTE:
In the above example, the calculated number is
0.51. The chart instructs you to round off the 1 to
0. Thus, the shim thickness is 0.50 mm.
Shims are supplied in the following thickness-
es.
c. To find middle driven pinion gear shim thick-
ness “B”, use the following formula.
“d” = a numeral on the middle driven pinion
gear, to be divided by 100 and either added
to or subtracted from “34”
“e” = Measured value
“f” = a numeral on the lower crankcase, to be
divided by 100 and added to “87”.
Example:
If the middle driven pinion gear is marked “-
03”
A. Middle drive pinion gear shim thickness
B. Middle driven pinion gear shim thickness
Middle drive pinion gear shim thickness
“A” = “c” - “a” - “b”
c
a
b
A
1
2
f
d
e
B
Hundredth Rounded value
0, 1, 2 0
3, 4, 5, 6, 7 5
8, 9 10
Middle drive pinion gear shim
Thickness (mm)
0.15 0.30 0.50
Middle driven pinion gear shim thickness
“B” = “d” + “e” - “f”