Yamaha FJR1300A(X), Service Manual

Page: 263 / 754

HANDLEBARS
4-76
▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
3. Install:
• Right handlebar switch “1”
NOTE:
Align the projection “a” on the right handlebar
switch with the hole “b” on the right handlebar.
4. Install:
• Left handlebar switch “1”
NOTE:
Align the projection “a” on the left handlebar
switch with the hole “b” on the left handlebar.
5. Install:
• Hand shift switch “1”
• Lead holder 2 “2”
NOTE:
• Align the projection “a” on the hand shift switch
with hole “b” on the left handlebar.
• When installing the hand shift switch, route the
left grip warmer lead “3” and left handlebar
switch lead “4” through the switch as shown in
the illustration, making sure to fasten the left
grip warmer lead with the lead holder 2.
• After installing the hand shift switch, check that
the left grip warmer lead does not interfere with
the movement of the hand shift lever.
6. Install:
• Right handlebar
• Left handlebar
NOTE:
Fit the projections on each handlebar into the
holes in the upper bracket, making sure that the
handlebars are installed in the same position.
7. Install:
• Handlebar bolts “1”
(temporarily)
• Handlebar nuts “2”
(temporarily)
a. Front position
b. Standard position
c. Rear position
1
a
b
4
3
2
a
b
c
a
b
c
a
b
c
a
b
c
a
b
c
a
b
c
a
b
c
a
b
c