Yamaha FJR1300A(X), Service Manual, Page: 32 / 754

FEATURES
1-23
Attention
• Do not turn the main switch to “OFF” while the vehicle is moving, otherwise the electrical systems will
be switched off, including the YCC-S system, which may result in loss of control or an accident. Make
sure that the vehicle is stopped before turning the main switch to “OFF”.
• The clutch will be engaged for a few seconds after the engine is stopped using the main switch if the
transmission is not in neutral. This means that the vehicle cannot be moved by pushing or pulling it.
To move the vehicle, turn the main switch to “ON”, and then apply the front or rear brake to disengage
the clutch. A click will be heard when the clutch is disengaged.
• Always stop the engine and turn the main switch to “LOCK” when parking the vehicle.
YCC-S indicator and warning light
• The YCC-S system is constantly performing a self-diagnosis.
• The YCC-S system also performs a self-diagnosis when the main switch is turned to “ON”. The YCC-
S indicator and warning light “1” come on during this self-diagnosis. After the self-diagnosis is com-
pleted, if there were no problems found, the YCC-S indicator and warning light will go off.
• If the YCC-S indicator and warning light come on while riding, stop the vehicle, park it in a safe place,
and then contact a Yamaha dealer.
Because the YCC-S system stops automatically when the YCC-S indicator and warning light come
on, it is impossible to shift since clutch operation is stopped. To move the vehicle, turn the main switch
to “OFF” and place the vehicle on the centerstand. While rotating the rear wheel, push the shift rod
forward and shift the transmission into neutral.