Yamaha F30A 2018, Service Manual

Page: 82 / 348

5-4
Electrical component and wire harness routing
1. Fuel hose
2. Blowby hose
3. Wire harness
4. Vapor gas hose
5. Throttle body lead
6. Throttle body
7. High-pressure fuel pump
8. Fuel injector
9. Vapor shut-off valve lead
A. Install the injector leads #1 and #2 into
the positions “a”, and then install the
wire harness into the positions “b”.
B. Clamp the fuel hose “8” and the wire
harness “3” at the position marked with
white tape.
C. Install the wire harness holders to the
holes of the intake manifold.
D. Clamp the holder to the wire harness “3”
at the position marked with white tape,
and then install the vapor gas hose “4”
and the blowby hose “2” to the holder.
E. Fasten the throttle body leads “5” to the
blowby hose “2” with a plastic tie.