Yamaha F30A 2018, Service Manual

Page: 265 / 348

9-5
Tiller handle (tiller handle model)
Assembling the tiller handle
1. Assemble:
• Tiller handle
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Pass the throttle shaft “1” through the fric-
tion piece “2” and tiller handle “3”.
b. Install the bushing “4”, retainers “5”, and
spring “6”.
c. Install the collar “1”, the washers “2”, the
plate “3”, and a new cotter pin “4”.
d. Install the neutral switch “1”, and then fas-
ten it using the new plastic ties “2”.
e. Install the throttle arm “3” and bushing “4”.
f. Align the marks “a” and “b”, and align the
cutouts “c” and “d”, and then install the
control link assembly “1”.
TIP:
Route the neutral switch lead under the control
link assembly “1”. See “Tiller handle (tiller han-
dle model)” (5-11).
g. Install the nut “1”, the throttle friction ad-
juster “2”, and a new cotter pin “3”.
1
2
3
4
5
5
6
3
4
1
1
2
2 3 2
3
2
4
1
2
2
2
3
4
a
b
c
d
1
1
2
3