Yamaha Electone EL-87, Owner'S Manual

Page: 143 / 156

139
13
Accessory Jacks and Controls
On the underside of the Electone keyboard is a separate panel equipped with various input/output
terminals and miscellaneous controls, the functions of which are described below.
1- 1 RHYTHM IN (Phone, L/R)
This pair of phone jacks are for connection to an external rhythm
machine. The sound of the connected device is mixed with the
sound of the Electone and played through the Electone’s speaker
system. The volume of the rhythm machine can be controlled
by the Expression pedal of the Electone.
1-
2
AUX. IN (RCA, L/R)
This pair of RCA pin jacks are for connection to an external stereo
sound source, such as a cassette deck or home audio system. The
sound of the connected device is mixed with the sound of the Electone
and played through the Electone’s speaker system. Adjust the level
by using the control(s) on the connected device.
2-
1
AUX. OUT (Phone, L/R), 2-
2
AUX. OUT (RCA, L/R)
These two separate sets of stereo outputs are for connection to
external amplification/speaker systems. The phone jacks (2-
1
)
are for connection to keyboard amplifiers and mixers; the RCA
pin jacks (2-
2
) are for direct connection to a home audio system
or cassette deck.
3
HEADPHONES
For connection of a stereo headphone set. When headphones are
connected to this jack, sound to the Electone’s built-in speaker system
is automatically cut off, allowing you to play without disturbing others.
4
-1
MIC.
For connection of a microphone.
4
-2
MIC. VOL.
For adjusting the level of the microphone input.
5
MIDI IN/OUT
For connecting external devices such as synthesizer and rhythm
machine with MIDI cables.