Yamaha Electone EL-87 Owner'S Manual Download Page 137

Page: 137 / 156

133

(2) Melody On Chord

To select knee lever control over Melody On Chord:

Press the A.B.C./M.O.C. button in the DISPLAY SELECT
section to select the A.B.C./M.O.C. page.

Then set the KNEE control to ON, and select one of the modes.

Press the knee lever continuously to the right to get the Melody
On Chord effect in the middle of the performance.

N O T E :

If the KNEE is set to ON, the Melody On
Chord cannot be applied without using the
knee lever.

(3) Lead Slide

To select knee lever control over Lead Slide:

Call up the Lead Condition display, by twice pressing a Lead
Voice button (or the Data Control button corresponding to a
Lead voice).

Select PAGE 2 by pressing Page buttons.

Then select KNEE and set the TIME parameter in the SLIDE
controls.

Press the knee lever continuously to the right to get the Lead
Slide effect in the middle of the performance.

N O T E :

If the KNEE is set to ON, the Lead Slide
cannot be applied without using the knee
lever.

Summary of Contents for Electone EL-87





























































































































































Search results

Summary of Contents for Electone EL-87

Reviews:

Related manuals for Electone EL-87

Brands by name

Popular brands

Yamaha Electone EL-87, Owner'S Manual

Search results

Summary of Contents for Electone EL-87

Reviews:

Related manuals for Electone EL-87

Brands by name

Popular brands