Yamaha EF2800i - Inverter Generator, Service Manual

Page: 55 / 103

3-27
ENG
CAUTION:
Be sure to remove any oil or grease from
the tapered portion of the magneto rotor
using a cloth dampened with thinner.
NOTE:
When installing the magneto rotor, make sure
the woodruff key is properly seated in the key
way of the crankshaft.
3. Install:
• Stator coil assembly bolts
1
• Tubes
NOTE:
• Turn the magneto rotor until the stator coil
assembly bolts are visible though the holes
in the rotor, and then remove the bolts
1
.
• Align the keyway
a
of the magneto rotor
with the stator coil assembly bolts
1
so that
they are in a straight line. The piston is at
top dead center when keyway and bolts are
in this position.
T
R
.
.
Stator coil assembly bolts:
10 Nm (1.0 m · kg, 7.2 ft · lb)
SVU3465
1
1
a
4. Tighten:
• Magneto rotor nut
1
• Washer
NOTE:
Tighten the magneto rotor nut
1
using the pri-
mary sheave holder
2
.
T
R
.
.
Magneto rotor nut:
65 Nm (6.5 m · kg, 47 ft · lb)
Sheave holder:
YS-01880, 90890-01701
2
1
SVU3470
GENERATOR