Yamaha EF2800i - Inverter Generator, Service Manual

Page: 61 / 103

3-33
ENG
PISTON, CONNECTING ROD, CRANKSHAFT AND
CRANKCASE
2. Measure:
• Piston clearance
Out of specification
→
Rebore or
replace cylinder and replace piston and
piston rings.
Piston clearance:
0.015 ~ 0.040 mm
(0.00059 ~ 0.00157 in)
Piston clearance =
Cylinder inside diameter –
Piston skirt diameter
3. Measure:
• Piston pin hole inside diameter
Out of specification
→
Replace.
Piston pin hole inside diameter:
16.002 ~ 16.013 mm
(0.6300 ~ 0.6304 in)
Wear limit:
16.020 mm (0.6307 in)
SVU3620
4. Measure:
• Piston pin diameter
Out of specification
→
Replace.
Piston pin diameter:
15.995 ~ 16.000 mm
(0.6297 ~ 0.6299 in)
Wear limit:
15.950 mm (0.6280 in)
SVU3630
5. Inspect:
• Check that the piston pin enters
smoothly into the piston pin hole.
If the piston pin fits tightly into the pis-
ton, check the piston pin hole. If there is
any protrusion, use a knife or scraper to
gently remove it so that the piston pin
can be pushed in gently with your fin-
gers.
SVU3640