background image

49

English       Chapter 12:  Storing and Managing Songs on Disks

Songs on a disk

Song No. 4 deleted

The following display appears.

5b

TO DELETE ONE SONG
Use the [–/NO] and [+/YES]
buttons to select the song that
you want to delete.

Then press [ENTER].

A display similar to the following appears.

6

Press [+/YES] to delete the song,
[–/NO] if you do not want to
delete the song.

Note:

Once deleted, songs cannot be

retrieved, so take care in selecting

which songs to delete.

Note:

You cannot delete copy-protected songs

in a floppy disk. However, you can

delete copy-protected songs in a

Memory Disk.

When a song is deleted, subsequent songs
are renumbered. For example, if you have
six songs on a disk, and song No. 4 is
deleted, song No. 5 becomes song No. 4
and song No. 6 becomes song No. 5, and so
on.

Rearranging the Song
Order (Song Sort)

You can rearrange the order of songs on a disk.

1

Specify a disk.

2

Press [FUNC.].

The FUNC. indicator lights and the
Function menu appears.

3

With the 

c

 cursor next to the Disk

option, press [ENTER].

The Disk menu appears.

4

Press [

>

] until the 

c

 cursor is next

to the Song Sort option, then
press [ENTER].

The following display appears.

5

Use the [–/NO] and [+/YES]
buttons to select the song that
you want to move.

6

When you have selected a song,
press [

>

], then use the [–/NO] and

[+/YES] buttons to select the
destination.

In this example, song No. 3 is being moved
to song No. 5.

Song 1 Song 2 Song 3 Song 4 Song 5 Song 6

Song 1 Song 2 Song 3 Song 4 Song 5

Summary of Contents for Disklavier






































































































Reviews: