61
English Chapter 15: Disk and Song File Utilities
Formatting Disks
The procedure below allows you to format new
unformatted floppy disks and to reformat both the
Memory Disks and formatted floppy disks. New
floppy disks must be formatted before they can be
used with the Disklavier.
Formatting a disk erases all the data previously
stored on the disk, so always make sure the disk
you are going to format does not contain songs
you want to keep.
Floppy Disk Accidental
Erasure Protection
Floppy disks have an erasure protection tab
located on the reverse side of the disk, in the
bottom right-hand corner. When formatting a disk,
make sure that its erasure protection tab is set to
“unprotected”.
1
Press [DRIVE] and specify the disk
to format.
Note:
If you are formatting a floppy disk,
make sure that the floppy disk’s erasure
protection tab is set to “unprotected”.
If the disk has not been formatted, the
following display appears.
If the disk contains songs, it might be worth
checking them to see if there are any you
want to keep.
2
Press [FUNC.].
The FUNC. indicator lights and the
Function menu appears.
3
With the
c
cursor next to the Disk
option, press [ENTER].
The Disk menu appears.
4
With the
c
cursor next to the
Format option, press [ENTER].
The following display appears.
5
Use the [–/NO] and [+/YES] to
select a disk type: SMF Type Disk
or E-SEQ Type Disk. Then press
[ENTER].
Protected
Unprotected
When the tab window is open, formatting
and recording are not possible.
When the tab window is closed, formatting
and recording are possible.
