Yamaha Disklavier E3, Operation Manual

Page: 53 / 207

Advanced Song Playback
4
Chapter
34
■
Adjusting the Voice Balance
Press [BALANCE] three times on the remote control.
The voice balance setting screen appears.
Note:
You can also use the dial on the
control unit to adjust the volume.
Press [+/YES] and [–/NO] to adjust the volume of the voice.
Voice volume can be adjusted in a range of 0 to 127.
Note:
This function cannot be used to
adjust the pitch of external audio
CDs connected to the OMNI IN
jacks.
You can temporarily adjust the pitch of the song contains audio
(PianoSoft·PlusAudio, SmartPianoSoft) or an audio CD for your listening
pleasure.
Pitch adjustments are effective until another medium or album is selected,
recording is started, or the Disklavier is turned off.
During the song playback, press [FUNC.] on the remote
control.
The audio pitch setting screen appears.
Press [+/YES] and [–/NO] to change the audio pitch.
Audio pitch can be adjusted in a range of –50 cent to +50 cent (one
semitone as 100 cents).
1
×3
VOICE BALANCE 100
=BALANCE=
-/+
2
Adjusting the Pitch of Audio
During playback [FUNC.]
1
Audi00cent
=CD= -+ENT
2
Audi01cent
=CD= -+ENT