Yamaha AVENTAGE RX-A1060 Owner'S Manual Download Page 119

Page: 119 / 190

119

HDMI

Configures the HDMI settings.

⬛

HDMI Control

Enables/disables HDMI Control (p.153).

Settings

To use HDMI control, you need to perform the HDMI Control link setup (p.153) after connecting HDMI

Control-compatible devices.

TV Audio Input

Selects an audio input jack of the unit to be used for TV audio input when “HDMI Control” is set

to “On”. The unit’s input source automatically switches to TV audio when the TV input is

switched to its built-in tuner.

Settings

AUDIO 1-3

Default

AUDIO 1

When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for connecting an

external device because the input will be used for TV audio input.

ARC

Enables/disables ARC (p.155) when “HDMI Control” is set to “On”.

Settings

You do not need to change this setting normally. In case noises are produced from the speakers connected to the

unit because TV audio signals input to the unit via ARC are not supported by the unit, set “ARC” to “Off” and use

the TV’s speakers.

Standby Sync

Select whether to use HDMI control to link the standby behavior of the TV and the unit when

“HDMI Control” is set to “On”.

Settings

⬛

Audio Output

Selects a device to output audio.

• The “Amp” and “HDMI OUT1” settings are available only when “HDMI Control” is set to “Off”.

• The “HDMI OUT2” setting is available only when “HDMI OUT2 Assign” (p.125) is set to “Main”.

Amp

Enables/disables the audio output from the speakers and headphones connected to the unit.

Settings

Off

Disables HDMI Control.

Enables HDMI Control.

Configure the settings in “TV Audio Input”, “ARC” and “Standby Sync”.

Off

Disables ARC.

Enables ARC.

Off

Does not set the unit to standby mode when the TV is turned off.

Sets the unit to standby mode when the TV is turned off.

Auto

Sets the unit to standby mode when the TV is turned off only when the unit is
receiving TV audio or HDMI signals.

Off

Disables the audio output from the speakers and headphones.

Enables the audio output from the speakers and headphones.

Summary of Contents for AVENTAGE RX-A1060































































































































































































Search results

Summary of Contents for AVENTAGE RX-A1060

Reviews:

Related manuals for AVENTAGE RX-A1060

Brands by name

Popular brands

Yamaha AVENTAGE RX-A1060, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A1060

Reviews:

Related manuals for AVENTAGE RX-A1060

Brands by name

Popular brands