Yamaha AVENTAGE RX-A1060 Owner'S Manual Download Page 145 | Manualshive

Page: 145 / 190

background image

En

145

Error indications on the front display

Message

Cause

Remedy

Access denied

Access to the PC is denied.

Configure the sharing settings and select the unit as a device to which music contents are shared (p.75).

Access error

The unit cannot access the USB device.

Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.

There is a problem with the signal path from the network to the unit.

Make sure your router and modem are turned on.

Check the connection between the unit and your router (or hub) (p.36).

Check SP Wires

The speaker cables short circuit.

Twist the bare wires of the cables firmly and connect to the unit and speakers properly.

Internal Error

An internal error has occurred.

Contact the nearest authorized Yamaha dealer or service center.

No content

There are no playable files in the selected folder.

Select a folder that contains files supported by the unit.

No device

The unit cannot detect the USB device.

Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.

Please wait

The unit is preparing for connecting to the network.

Wait until the message disappears. If the message stays more than 3 minutes, turn off the unit and turn it on
again.

RemID Mismatch

The remote control IDs of the unit and the remote control are not
identical.

Change the remote control ID of the unit or the remote control (p.132).

Remote Off

The unit cannot be operated from remote control because the remote
control sensor on the main unit is turned off.

Use the controls on the front panel. To use the remote control, set “REMOTE SENSOR” in the “ADVANCED SETUP”
menu to “ON” (p.132).

Unable to play

The unit cannot play back the songs stored on the USB device for some
reasons.

Check the song data. If it cannot be played on another device, the song data may be defective.

The unit cannot play back the songs stored on the PC for some reason.

Check if the format of files you are trying to play is supported by the unit. For information about the formats
supported by the unit, see “Playing back music stored on media servers (PCs/NAS)” (p.75). If the unit supports
the file format, but still cannot play back any files, the network may be overloaded with heavy traffic.

USB Overloaded

An overcurrent is flowing through the USB device.

Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.

Version error

Firmware update is failed.

Update the firmware again.

«
...
143
144
145
146
147
...
»

Summary of Contents for AVENTAGE RX-A1060































































































































































































Reviews:

No comments

Related manuals for AVENTAGE RX-A1060

RX-Z11 - AV Receiver

Brand: Yamaha Pages: 243

Brand: Velleman Pages: 16

Brand: B&K Pages: 64

TracVision DIRECTV

Brand: KVH Industries Pages: 127

VM9412 - In-dash DVD Receiver

Brand: Jensen Pages: 38

Brand: Topfield Pages: 46

Brand: Icom Pages: 48

Brand: Prology Pages: 17

Brand: Olin Pages: 14

Brand: X-Digital System Pages: 45

Brand: RIP TUNES Pages: 31

Brand: X-Digital System Pages: 11

Brand: REFI Multimedia Pages: 32

Brand: ENFORCER Pages: 8

Brand: Harman Kardon Pages: 12

Brand: Icom Pages: 32

Any Spot AS1000

Brand: Galaxy Audio Pages: 20

Brand: Eddystone Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands