Yamaha AVENTAGE RX-A1060, Owner'S Manual

Page: 33 / 190

En
33
Connecting audio devices (such as CD players)
Connect audio devices such as CD players, MD players, and a turntable to the unit. Depending
on the audio output jacks available on your audio device, choose one of the following
connections.
Y
The following explanation is based on the assumption that you have not changed the “Input Assignment” setting
(p.126) in the “Setup” menu. As necessary, you can assign the COAXIAL (
③
,
④
,
⑤
) and OPTICAL (
①
,
②
,
⑥
) jacks
to another input source.
X
If you make more than one audio connection for one input source, an audio signal played back on the unit will be
determined according to the “Audio Select” setting (p.98) in the “Option” menu.
If you select the input source by pressing AV 1-4, AUDIO 1-3 or PHONO on the remote control,
the audio played back on the audio device will be output from the unit.
Audio output jacks on audio device Audio output jacks on the unit
Digital coaxial
AV 1-2 (COAXIAL)
AUDIO 3 (COAXIAL)
Digital optical
AV 3 (OPTICAL)
AUDIO 1-2 (OPTICAL)
Analog stereo
AV 1-4 (AUDIO)
AUDIO 1-3 (AUDIO)
Turntable (PHONO) PHONO
When connecting a turntable
• The PHONO jack of the unit is compatible with an MM cartridge. To connect a turntable with a
low-output MC cartridge, use a boosting transformer.
• Connecting the turntable to the GND terminal of the unit may reduce noise in the signal.
HDMI OUT
ARC (ZONE OUT)
1 2
(1 BD/DVD)
AV 1 AV 2
R
L
AV 1 AV 2 AV 3 AV 4
AUDIO 1 AUDIO 2 AUDIO 3
(2 TV)
(1 BD/DVD)
OPTICAL
4
OPTICAL
3
COAXIAL COAXIAL
2
COAXIAL
1
PHONO
GND
FM
75 ȍ
ANTENNA
(4 RADIO)
OPTICAL
ZONE OUT
ZONE 2
SURROUND
R
5 6
L
AM
FRONT
Y AV
A
MONITOR OUT/
ZONE OUT
Y
(HDCP2.2)
R
L
PHONO
GND
R
L
COAXIAL
OPTICAL
R
L
PHONO
GND
C C
L
R
L
R
O O
L
R
L
R
Audio output
(any of digital coaxial, digital optical,
analog stereo)
Any of AV 1-4, AUDIO 1-3
(COAXIAL, OPTICAL, AUDIO) jacks
The unit
(rear)
Audio device
PHONO jacks
Audio output
(PHONO)
Turntable
Ground lead