Yamaha AVENTAGE RX-A1060 Owner'S Manual Download Page 124

Page: 124 / 190

124

⬛

Zone2 Set

Configures the Zone2 settings.

Volume

Enables/disables volume adjustments for Zone2 output.

If you have connected an external amplifier with volume control to the unit, disable volume

adjustments for Zone2.

Settings

This setting is not available depending on the “Power Amp Assign” setting.

Max Volume

Sets the Zone2 limit value of the volumes.

Setting range

-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB

This setting is available only when “Volume” is set to “Variable”.

Initial Volume

Sets the Zone2 initial volume for when the unit is turned on.

Settings

This setting is available only when “Volume” is set to “Variable”.

Audio Delay

Adjusts the Zone2 audio output timing so that the audio is synchronized with the video.

Setting range

0 ms to 100 ms (1 ms increments)

Mono

Switches between stereo and monaural for Zone2 output.

Settings

Enhancer

Enables/disables Compressed Music Enhancer (p.65) for Zone2 output.

Settings

Tone Control

Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) for Zone2

output.

You can also adjust the “Treble” and “Bass” settings for Zone2 output with the front panel controls (p.89).

Settings

Fixed

Disables volume adjustments for Zone2 output.

Variable

Enables volume adjustments for Zone2 output.

Off

Sets the level at the volume level of the unit when it last entered standby mode.

Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB increments).
(This setting works only when the initial volume is set lower than “Max Volume”.)

Off

Produces stereo sounds in Zone2.

Produces monaural sounds in Zone2.

Off

Disables Compressed Music Enhancer.

Enables Compressed Music Enhancer.

Auto

Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass)
automatically.

Manual

Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass)
manually (-6.0 to +6.0 dB, 0.5 dB increments).

Bypass

Does not adjust the level of high-frequency range (Treble) and low-frequency
range (Bass).

Summary of Contents for AVENTAGE RX-A1060































































































































































































Search results

Summary of Contents for AVENTAGE RX-A1060

Reviews:

Related manuals for AVENTAGE RX-A1060

Brands by name

Popular brands

Yamaha AVENTAGE RX-A1060, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A1060

Reviews:

Related manuals for AVENTAGE RX-A1060

Brands by name

Popular brands