Yamaha AVENTAGE RX-A1060 Owner'S Manual Download Page 155

Page: 155 / 190

155

Audio Return Channel (ARC)

ARC allows you to input TV audio to the unit with the HDMI cable which transmits video signal

to the TV.

Check the following after the HDMI Control settings.

Select a TV program with the TV remote control.

Check that the input source of the unit will be automatically switched to

“AUDIO 1” and the TV audio will be played back on the unit.

If you cannot hear the TV audio, check the following:

• “ARC” (p.119) in the “Setup” menu is set to “On”.

• The HDMI cable is connected to the ARC-compatible HDMI jack (HDMI jack marked

“ARC”) on the TV.

Some HDMI jack on the TV is not compatible with ARC. For details, refer to the instruction

manual for the TV.

• If the audio is interrupted while using ARC, set “ARC” (p.119) in the “Setup” menu to “Off” and use an

audio cable (digital optical or stereo pin cable) to input TV audio to the unit (p.29).

• When using ARC, connect a TV with an HDMI cable that supports ARC.

“AUDIO 1” is set as TV audio input at the factory. If you have connected any external device to the AUDIO

1 jacks, use “TV Audio Input” (p.119) in the “Setup” menu to change the TV audio input assignment. To use

the SCENE function (p.59), you also need to change the input assignment for SCENE (TV).

HDMI signal compatibility

Audio signals

Video signals

The unit is compatible with the video signals of the following resolutions:

• VGA

• 480i/60 Hz

• 576i/50 Hz

• 480p/60 Hz

• 576p/50 Hz

• 720p/60 Hz, 50 Hz

• 1080i/60 Hz, 50 Hz

• 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz

• 4K/60 Hz, 50Hz, 30 Hz, 25 Hz, 24 Hz

• When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending on

the type of the DVD player.

• The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the instruction

manual for each device.

• To decode audio bitstream signals on the unit, set the input source device appropriately so that the device

outputs the bitstream audio signals directly (does not decode the bitstream signals on the playback device).

For details, refer to the instruction manual for the playback device.

Audio signal type

Audio signal format

Compatible media (example)

2ch Linear PCM

2ch, 32 to 192 kHz, 16/20/24 bit

CD, DVD-Video, DVD-Audio

Multichannel Linear PCM

8ch, 32 to 192 kHz, 16/20/24 bit

DVD-Audio, BD (Blu-ray disc), HD
DVD

DSD

2 to 5.1ch, 2.8224 MHz, 1 bit

SACD

Bitstream

Dolby Digital, DTS

DVD-Video

Bitstream
(High definition audio)

Dolby TrueHD, Dolby Digital Plus,
DTS-HD Master Audio,
DTS-HD High Resolution Audio,
DTS Express

BD (Blu-ray disc), HD DVD

Summary of Contents for AVENTAGE RX-A1060































































































































































































Search results

Summary of Contents for AVENTAGE RX-A1060

Reviews:

Related manuals for AVENTAGE RX-A1060

Brands by name

Popular brands

Yamaha AVENTAGE RX-A1060, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A1060

Reviews:

Related manuals for AVENTAGE RX-A1060

Brands by name

Popular brands