Yamaha AVENTAGE RX-A1060 Owner'S Manual Download Page 153

Page: 153 / 190

153

Information on HDMI

This section explains the functions related to HDMI and its signal compatibility.

HDMI Control

HDMI Control allows you to operate external devices via HDMI. If you connect a TV that

supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as power

and volume) with TV remote control operations. You can also control playback devices (such

as HDMI Control-compatible BD/DVD players) connected to the unit with an HDMI cable.

For details on connections, see “Connecting a TV and playback devices” (p.28) and

“Connecting video devices (such as BD/DVD players)” (p.31).

Operations available from the TV’s remote control

• Standby synchronization

• Volume control including mute

• Switching to input audio from the TV when the TV input is switched to its built-in tuner

• Switching to input video/audio from the selected playback device

• Switching between audio output devices (the unit or TV speaker)

(Example)

Operations available from the unit’s remote control

• Starting playback on the playback device and turning on the TV with a scene selection (p.58)

• Switching the TV input to display the on-screen menu (when ON SCREEN is pressed)

• Controlling the playback device (playback and menu operations) using the external device

operation keys

(Example)

To use HDMI Control, you need to perform the following HDMI Control link setup after

connecting the TV and playback devices.

For details on settings and operating your TV, refer to the instruction manual for the TV.

This setup is required every time you add a new HDMI Control-compatible device to your system.

Turn on the unit, TV, and playback devices.

Configure the settings of the unit.

Switch the TV input to display video from the unit.

Press ON SCREEN.

Use the Cursor keys to select “Setup” and press ENTER.

HDMI Control

Turn off the TV

The unit turns off

(standby)

HDMI Control

Playback device

also turns off

HDMI Control

Press SCENE (BD/DVD)

Turns on and displays

video from the playback

device

HDMI Control

Playback starts

ENTER

RETURN

OPTION

SCREEN

DISPLAY

RETURN

OPTION

DISPLAY

ON SCREEN
Cursor keys
ENTER

Summary of Contents for AVENTAGE RX-A1060































































































































































































Search results

Summary of Contents for AVENTAGE RX-A1060

Reviews:

Related manuals for AVENTAGE RX-A1060

Brands by name

Popular brands

Yamaha AVENTAGE RX-A1060, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A1060

Reviews:

Related manuals for AVENTAGE RX-A1060

Brands by name

Popular brands