Yamaha AL125 Owner'S Manual Download Page 26

Page: 26 / 84

INSTRUMENT AND CONTROL FUNCTIONS

4-9

EAU37481

Helmet holders

The helmet holders are located under
the seat.

To secure a helmet to a helmet
holder

1. Open the seat. (See page 4-8.)
2. Attach a helmet to a helmet hold-

er, and then securely close the
seat.

WARNING! Never ride

with a helmet attached to the
helmet holder, since the helmet
may hit objects, causing loss
of control and possibly an acci-
dent.

[EWA10161]

To release a helmet from a helmet
holder

Open the seat, remove the helmet from
the helmet holder, and then close the
seat.

EAUU0390

Convenience hook

EWAU0010

WARNING

●

Do not exceed the load limit of
1.0 kg (2.2 lb) for the conve-
nience hook.

●

Do not exceed the maximum
load of 160 kg (353 lb) for the
motorcycle.

1. Helmet holder

ZAUU0601

1. Convenience hook

ZAUU0602

33SF8199E0.book Page 9 Friday, December 11, 2009 1:56 PM

Summary of Contents for AL125





















































































Search results

Summary of Contents for AL125

Reviews:

Related manuals for AL125

Brands by name

Popular brands

Yamaha AL125, Owner'S Manual

Search results

Summary of Contents for AL125

Reviews:

Related manuals for AL125

Brands by name

Popular brands