background image

PERIODIC MAINTENANCE AND ADJUSTMENT

7-21

7

TIP

The tire tread depth limits may differ
from country to country. Always comply
with the local regulations. 

_

Tire information

This motorcycle is equipped with tube
tires.

EWA10461

WARNING

The front and rear tires should be of
the same make and design, other-
wise the handling characteristics of
the vehicle may be different, which
could lead to an accident. 

_

After extensive tests, only the tires list-
ed below have been approved for this
model by Yamaha Motor Co., Ltd.

EWA10561

WARNING

It is dangerous to ride with a
worn-out tire. When a tire tread
begins to show crosswise lines,
have a Yamaha dealer replace
the tire immediately.

The replacement of all wheel
and brake-related parts, includ-
ing the tires, should be left to a
Yamaha dealer, who has the
necessary professional knowl-
edge and experience.

It is not recommended to patch
a punctured tube. If unavoid-
able, however, patch the tube
very carefully and replace it as
soon as possible with a high-
quality product. 

Minimum tire tread depth (front and 
rear):

0.8 mm (0.03 in)

Front tire:

Size:

70/90-14M/C 34P

Manufacturer/model:

IRC/NF59

Rear tire:

Size:

90/80-14M/C 49P

Manufacturer/model:

IRC/NR76A

33SF8199E0.book  Page 21  Friday, December 11, 2009  1:56 PM

Summary of Contents for AL125





















































































Reviews: