Yamaha AL125 Owner'S Manual Download

Page: 71 / 84

PERIODIC MAINTENANCE AND ADJUSTMENT

7-35

Rear turn signal light bulb

1. Open the seat. (See page 4-8.)
2. Remove the panel by removing

the screws, and then pulling the
panel outward.

3. Remove the socket (together with

the bulb) by turning it counter-
clockwise.

4. Remove the burnt-out bulb from

the socket by pulling it out.

5. Insert a new bulb into the socket.

ECAU0080

NOTICE

If a turn signal light bulb of different
wattage than recommended is
used, the turn signal light flashing
may be affected.

6. Install the socket (together with

the bulb) by turning it clockwise,
and then close the seat.

EAUU0861

Replacing an auxiliary light
bulb

This model is equipped with two auxil-
iary lights. If an auxiliary light bulb
burns out, replace it as follows.

1. Remove panel C. (See page 7-8.)

2. Remove the auxiliary light bulb

socket (together with the bulb) by
turning it counterclockwise.

1. Rear turn signal light bulb socket

ZAUU0658

1. Rear turn signal light bulb

ZAUU0659

1. Panel C

ZAUU0660

33SF8199E0.book Page 35 Friday, December 11, 2009 1:56 PM

Summary of Contents for AL125





















































































Search results

Summary of Contents for AL125

Reviews:

Related manuals for AL125

Brands by name

Popular brands

Yamaha AL125, Owner'S Manual

Search results

Summary of Contents for AL125

Reviews:

Related manuals for AL125

Brands by name

Popular brands