Yamaha AL125 Owner'S Manual Download Page 22

Page: 22 / 84

INSTRUMENT AND CONTROL FUNCTIONS

4-5

EAU12950

Rear brake lever

The rear brake lever is located on the
left handlebar grip. To apply the rear
brake, pull this lever toward the handle-
bar grip.

EAU37471

Fuel tank cap

To remove the fuel tank cap

1. Open the seat. (See page 4-8.)
2. Turn the fuel tank cap counter-

clockwise and pull it off.

To install the fuel tank cap

1. Insert the fuel tank cap into the

tank opening and turn it clockwise
until the “

” marks on the cap and

tank are aligned.

2. Close the seat.

EWA11091

WARNING

Make sure that the fuel tank cap is
properly closed after filling fuel.
Leaking fuel is a fire hazard.

1. Rear brake lever

ZAUU0596

1. Fuel tank cap

a. Open.

b. Close.

ZAUU0597

(a)

(b)

(a)

ZAUU0598

33SF8199E0.book Page 5 Friday, December 11, 2009 1:56 PM

Summary of Contents for AL125





















































































Search results

Summary of Contents for AL125

Reviews:

Related manuals for AL125

Brands by name

Popular brands

Yamaha AL125, Owner'S Manual

Search results

Summary of Contents for AL125

Reviews:

Related manuals for AL125

Brands by name

Popular brands