Yamaha AL125 Owner'S Manual Download

Page: 52 / 84

PERIODIC MAINTENANCE AND ADJUSTMENT

7-16

3. Remove the element by pulling it

out.

4. Clean the element with solvent,

and then squeeze the remaining
solvent out.

5. Check the element for damage

and replace it if necessary.

6. Apply oil of the recommended

type to the entire surface of the el-
ement, and then squeeze the ex-
cess oil out.

WARNING! Use

only a dedicated parts cleaning
solvent. To avoid the risk of fire
or explosion, do not use gaso-
line or solvents with a low flash
point.

[EWA10431]

NOTICE:

To avoid

damaging the air filter element,
handle it gently and carefully,
and do not twist it.

[ECA10521]

TIP

The element should be wet but not
dripping.

7. Install the element into the filter

case.

8. Place the air filter case cover in its

original position, and then install
the bolts.

NOTICE:

Make sure

that each filter element is prop-
erly seated in its case. The en-
gine should never be operated
without the filter elements in-
stalled, otherwise the piston(s)
and/or cylinder(s) may become
excessively worn.

[ECA10531]

Cleaning the air filter check hose
and caps

1. Check each cap at the bottom left

side of the air filter case and the
hose at the bottom of the V-belt
case for accumulated dirt or wa-
ter.

1. V-belt air filter case cover

2. Bolt

1. V-belt air filter element

ZAUU0631

ZAUU0632

Recommended oil:

Yamaha foam air filter oil or other
quality foam air filter oil

33SF8199E0.book Page 16 Friday, December 11, 2009 1:56 PM

Summary of Contents for AL125





















































































Search results

Summary of Contents for AL125

Reviews:

Related manuals for AL125

Brands by name

Popular brands

Yamaha AL125, Owner'S Manual

Search results

Summary of Contents for AL125

Reviews:

Related manuals for AL125

Brands by name

Popular brands