Yamaha AL125 Owner'S Manual Download Page 70

Page: 70 / 84

PERIODIC MAINTENANCE AND ADJUSTMENT

7-34

EAUU0880

Replacing a tail/brake light
bulb or a rear turn signal light
bulb

If a tail/brake light bulb or a rear turn
signal light bulb burns out, replace it
as follows.

Tail/brake light bulb

1. Open the seat. (See page 4-8.)
2. Remove the panel by removing

the screws, and then pulling the
panel outward.

3. Remove the socket (together with

the bulb) by turning it counter-
clockwise and pulling the taillight
bulb socket up at an angle.

4. Remove the burnt-out bulb by

pushing it in and turning it coun-
terclockwise.

5. Insert a new bulb into the socket

by pushing it in and turn it clock-
wise until it stops.

ECAU0090

NOTICE

If a taillight bulb of different watt-
age than recommended is used, it
may cause the battery to discharge
or affect the taillight lighting.

6. Install the socket (together with

the bulb) by turning it clockwise.

7. Install the panel and close the

seat.

1. Screw (x2)

ZAUU0654

1. Tail/brake light bulb socket

ZAUU0656

1. Tail/brake light bulb

ZAUU0657

33SF8199E0.book Page 34 Friday, December 11, 2009 1:56 PM

Summary of Contents for AL125





















































































Search results

Summary of Contents for AL125

Reviews:

Related manuals for AL125

Brands by name

Popular brands

Yamaha AL125, Owner'S Manual

Search results

Summary of Contents for AL125

Reviews:

Related manuals for AL125

Brands by name

Popular brands