Yamaha 2004 Rhino 660 YXR660FAS, Service Manual

Page: 118 / 421

3 - 41
CHK
ADJ
CHECKING THE TIRES
1. Measure:
• tire pressure (cold tire pressure)
Out of specification
→
Adjust.
NOTE:
• The tire pressure gauge
1
is included as
standard equipment.
• If dust or the like is stuck to this gauge, it will
not provide the correct readings. Therefore,
take two measurements of the tire’s pressure
and use the second reading.
WARNING
Uneven or improper tire pressure may
adversely affect the handling of this vehicle
and may cause loss of control.
• Maintain proper tire pressures.
• Set tire pressures when the tires are cold.
• Tire pressures must be equal in both front
tires and equal in both rear tires.
2. Check:
• tire surfaces
Wear/damage
→
Replace.
WARNING
It is dangerous to ride with a worn-out tire.
When tire wear is out of specification,
replace the tire immediately.
Cold tire
pressure
Front Rear
Standard
70 kPa
(0.70 kg/cm
2
,
10 psi)
98 kPa
(0.98 kg/cm
2
,
14 psi)
Minimum
63 kPa
(0.63 kg/cm
2
,
9 psi)
91 kPa
(0.91 kg/cm
2
,
13 psi)
Maximum
77 kPa
(0.77 kg/cm
2
,
11 psi)
105 kPa
(1.05 kg/cm
2
,
15 psi)
Tire wear limit
a
Front and rear: 3.0 mm (0.12 in)